Roland RD-500 - Setting MIDI Transmit Channels

@ Setting the MIDI Transmit Channel
Set the MIDI transmit channel (TX Channel) of the TX LOWER/TX UPPER Part to the receive channel
of the external MIDI sound module assigned to each Part.
a genet Cire Tx:
ion UPPER Er _SPUT
@ '@
» Select the Function mode.
. Press the TX CH button (the indicator will light).
. Select the Part to be edited using the LOWER/UPPER buttons.
. Set the channel number using the INC/DEC buttons, VALUE slider or Numerical Keys.
Valid Channel Number: 1— 16
a ON =
@ Playing two sound modules in different keyboard sections — SPLIT
SSP KAINT. LEVEL enemies HE
LOWER.“ URPER
1. Select the Split mode.
Press the SPLIT button (the indicator will light).
The indicators on the LOWER and UPPER buttons will also light.
2. Set the Split Point.
Press any key while holding the SPLIT button down, and the keyboard will be divided into two
sections at the key (Split Point) you pressed. The MIDI sound module assigned to the TX LOWER Part
is played on the lower section of the keyboard, and the sound module assigned to the TX UPPER Part
is played on the upper section.
Split Point
TX LOWER TX UPPER
SPUT
Tm *
Hold down
Press the key
42