Roland SP-404A User Manual

13
Deutsch Français Italiano Español Português NederlandsEnglish
Recording Samples— Basic Operation
STEP 1: Connecting Equipment
Connecting a Portable Music Player or Stereo
If you’re connecting your portable music player, stereo, or CD player, use audio cables to connect your device’s output jacks
(LINE OUT jacks, AUX OUT jacks, etc.) to the SP-404A’s LINE IN jacks.
Your stereo’s LINE
OUT jacks
Your portable music
player’s output jack
LINE IN jacks
A record player (turntable) cannot be connected directly
to the SP-404A. If you want to connect a record player, you
must use an audio amp that will accept a connection from
a record player, or use a phono equalizer between the
record player and the SP-404A.
Audio amp
or
Phono equalizer
Caution when making connections
• To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn o the power
on all devices before making any connections.
• When connection cables with resistors are used, the volume level of equipment connected to the inputs (LINE IN) may be
low. If this happens, use connection cables that do not contain resistors.

Roland SP-404A Specifications

General

Bit rate	16 bit
Sample rate	44.1 kHz
Housing color	Black
Number of pads	13
Number of knobs	3
Sound effects quantity	29
Display type	LED
Built-in display	Yes
Power source type	AC, Battery
Memory card included	SD

Weight and Dimensions

Depth	257 mm
Width	178 mm
Height	73 mm
Weight	1200 g