Roland SP-404A User Manual

15
Deutsch Français Italiano Español Português NederlandsEnglish
Recording Samples— Basic Operation
STEP 2: Sampling
Here we’ll explain how to use Sampling to record to pad [1] of bank J.
1. Make sure that the [SELECT] button is extinguished.
If it’s lit, press the button to turn it o.
2. Press the [REC] button so the button is lit.
If you decide to
cancel sampling, Press the
[CANCEL] button.
3. Press the BANK [E/J] button so it’s blinking.
If the button is lit, bank E is selected; press the [E/J] button
once again so it’s blinking.
Pads to which you can sample will blink.
4. Press the pad [1].
Pad [1] will light, and the [REC] button will blink.
5. Make STEREO setting.
Turn this o if you’re sampling in
monaural from a mic, etc.
How this aects the sampling time
Sampling in monaural will give you approximately twice as much sampling time as stereo.
Monaural sampling also allows you to play twice as many samples simultaneously (12 monaural samples, or 6 stereo
samples).

Roland SP-404A Specifications

General

Bit rate	16 bit
Sample rate	44.1 kHz
Housing color	Black
Number of pads	13
Number of knobs	3
Sound effects quantity	29
Display type	LED
Built-in display	Yes
Power source type	AC, Battery
Memory card included	SD

Weight and Dimensions

Depth	257 mm
Width	178 mm
Height	73 mm
Weight	1200 g