Roland SP-404A User Manual

23
Deutsch Français Italiano Español Português NederlandsEnglish
Error Message List
Message Description
EJC
Eject
Processing is not possible because the SD card was removed.
* Don’t remove the card while the power is on.
LoC
Lock
The SD card is locked. The SP-404A will be unable to function properly if the SD card is locked. (“LoC” will appear in the
display.) Make sure that the SD card is not locked (p. 7).
ENP
Empty
There is no sample, pattern, or backup data to delete.
There is no backup data to load.
There is no WAV or AIFF to import.
Err
Error Invalid data was found, and it was repaired or deleted.
FUL
Memory Full
Processing could not be performed because of insucient memory.
While sampling, the sample exceeded 2 GB (approximately 180 minutes for stereo). Sampling was stopped.
Prt
Protected
Processing could not be performed because Protect is enabled.
If you want to continue the operation, turn o Protect as described in “About the Protect Function” (p. 21).
UnS
Unsupported format Processing was halted because the WAV or AIFF was in a format not supported by the SP-404A.

Roland SP-404A Specifications

General

Bit rate	16 bit
Sample rate	44.1 kHz
Housing color	Black
Number of pads	13
Number of knobs	3
Sound effects quantity	29
Display type	LED
Built-in display	Yes
Power source type	AC, Battery
Memory card included	SD

Weight and Dimensions

Depth	257 mm
Width	178 mm
Height	73 mm
Weight	1200 g