EasyManua.ls Logo

Roland SP-606 - Chapter 10. About V-LINK; What Is V-LINK; Connection Example; Basic V-LINK Operation

Roland SP-606
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
75
Chapter 10. About V-LINK
V-LINK ( ) is functionality promoted by Roland that allows linked performance of music and
visual material. By using V-LINK-compatible video equipment (such as the Edirol DV-7PR or P-1), visual effects
can be easily linked to, and made part of the expressive elements of a performance.
For example, when the SP-606 is used in conjunction with the Edirol P-1, applications such as the following are
made possible:
Use the SP-606’s sequencer to play music and show images in synchronization.
Use the SP-606’s pads or sequencer playback (song or pattern) to switch photos or pages on the Edirol P-1.
In order to use V-LINK between the SP-606 and the Edirol P-1, you will need to connect the two
units using a MIDI cable (sold separately).
Use a MIDI cable to connect the SP-606’s MIDI OUT connector to the MIDI IN connector of the Edirol P-1.
To prevent malfunction and/or speaker damage, you must turn down the volume on all devices
and turn off their power before making connections.
1.
Go to the Play screen (p. 15).
2.
Press [V-LINK] so it’s lit.
The
V-LINK
screen will appear.
In this state, you can operate the SP-606’s pads or knobs to control images
in conjunction with the SP-606’s performance.
When you press [F1] (RESET), the display will indicate “Send All Reset”;
the effects being applied to the image will be reset, and settings such as
brightness and hue will all return to their default settings.
When you press [F2] (MODE), you can select whether the pads will
switch
PALETTES
or
CLIPS
.
When you press [F3] (SETUP), the
V-LINK SETUP
screen will appear (p. 76).
3.
Press [EXIT].
The V-LINK function will remain on, and you will return to the Play screen.
4.
When you are ready to turn off the V-LINK function, press [V-LINK] so its illumination is turned off.
If you returned to the Play screen in step 3, press [V-LINK] to return to the V-LINK screen and then press [V-
LINK] once again so its illumination is turned off.
The V-LINK function will always be off when you turn on the power.
What Is V-LINK?
Connection Example
Basic V-LINK Operation
SP-606 P-1
MIDI INMIDI OUT
SP-606_e.book 75 ページ 2004年6月21日 月曜日 午前10時8分

Table of Contents

Other manuals for Roland SP-606

Related product manuals