Roland SPD-SX PRO - Page 160

Effect List (English)
160
Parameter
Value
Explanation
Mode
S, M, L, S+M, S+L, M+L,
S+M+L
Combination of playback heads to use
Select from three different heads with different delay times.
S: Short
M: Middle
L: Long
Repeat Rate
0–127
Tape speed
Increasing this value will shorten the spacing of the delayed sounds.
Intensity
0–127
Amount of delay repeats
Bass
-15–+15 [dB]
Boost/cut for the lower range of the echo sound
Treble
-15–+15 [dB]
Boost/cut for the upper range of the echo sound
Head S Pan
L64–63R
Independent panning for the short, middle, and long playback heads
Head M Pan
L64–63R
Head L Pan
L64–63R
Tape
Distortion
0–5
Amount of tape-dependent distortion to be added
This simulates the slight tonal changes that can be detected by signal-analysis
equipment.
Increasing this value will increase the distortion.
W/F Rate
0–127
Speed of wow/flutter (complex variation in pitch caused by tape wear and
rotational irregularity)
W/F Depth
0–127
Depth of wow/flutter
Echo Level (*1)
0–127
Volume of the echo sound
Direct Level
0–127
Volume of the original sound
Level
0–127
Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer to “De MFX bedienen met de PAD EDIT [1] [2]-regelaars (MFX
Ctrl)(P.204)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Het MASTER EFFECT bedienen met de MASTER
EFFECT-regelaar (MASTER EFFECT CTRL)(P.205)”.