Roland SPD-SX PRO - Lo-Fi Effects; LOFI Compress; Bit Crusher

Effect List (English)
198
Lo-fi effects
LOFI Compress(P.198)
Bit Crusher(P.198)
LOFI Compress
Degrades the sound quality.
Parameter
Value
Explanation
Pre Filter Type
1, 2, 3, 4, 5, 6
Selects the type of filter applied to the sound before
it passes through the Lo-Fi effect.
1: Compressor off
2–6: Compressor on
LoFi Type
1, 2, 3, 4, 5, 6, 7, 8, 9
Degrades the sound quality. The sound quality grows
poorer as this value is increased.
Post Filter
Type
OFF, LPF, HPF
Selects the type of filter applied to the sound after it
passes through the Lo-Fi effect.
OFF: No filter is used.
LPF: Cuts the frequency range above the Cutoff Freq
HPF: Cuts the frequency range below the Cutoff Freq
Post Filter
Cutoff
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000,
2500, 3150, 4000, 5000, 6300, 8000 [Hz]
Basic frequency of the Post Filter
Low Gain
-15–+15 [dB]
Gain of the low range
High Gain
-15–+15 [dB]
Gain of the high range
Balance (*1)
D100:0W–D0:100W
Volume balance between the direct sound (D) and
the effect sound (W)
Level
0–127
Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer to “De MFX bedienen met de PAD EDIT [1] [2]-regelaars (MFX
Ctrl)(P.204)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Het MASTER EFFECT bedienen met de MASTER
EFFECT-regelaar (MASTER EFFECT CTRL)(P.205)”.
Bit Crusher
This creates a lo-fi sound.
Parameter
Value
Explanation
Sample Rate (*1)
0–127
Adjusts the sample rate.
Bit Down
0–20
Adjusts the bit depth.
Filter
0–127
Adjusts the filter depth.
Low Gain
-15–+15 [dB]
Gain of the low range