Effect List (English) 
179 
Higher values will produce a deeper phaser effect. 
Speed 
Speed at which to raise or lower the frequency at which the sound is modulated (+: upward / -: 
downward) 
Level of the phase-shifted sound 
Stereo location of the output sound 
Low Gain 
High Gain 
*1: This parameter corresponds to MFX Ctrl. For details, refer to “De MFX bedienen met de PAD EDIT [1] [2]-regelaars (MFX 
Ctrl)(P.204)”. 
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Het MASTER EFFECT bedienen met de MASTER 
EFFECT-regelaar (MASTER EFFECT CTRL)(P.205)”. 
Ring Modulator 
This is an effect that applies amplitude modulation (AM) to the input signal, producing bell-like sounds. You can also change the 
modulation frequency in response to changes in the volume of the sound sent into the effect. 
 
Adjusts the frequency at which modulation is applied. 
Adjusts the amount of frequency modulation applied. 
Polarity 
Determines whether the frequency modulation moves towards higher frequencies or lower 
frequencies. 
UP: The filter will change toward a higher frequency. 
DOWN: The filter will change toward a lower frequency. 
Balance 
Volume balance between the direct sound (D) and the effect sound (W) 
*1: This parameter corresponds to MFX Ctrl. For details, refer to “De MFX bedienen met de PAD EDIT [1] [2]-regelaars (MFX 
Ctrl)(P.204)”. 
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Het MASTER EFFECT bedienen met de MASTER 
EFFECT-regelaar (MASTER EFFECT CTRL)(P.205)”.