Roland SPD-SX PRO - Speaker Simulator; Guitar Amp Simulator

Effect List (English)
193
Speaker Simulator
Simulates the speaker type and microphone settings used to record the speaker sound.
Parameter
Value
Explanation
Speaker Type
Cabinet
Diameter (in inches) and number of the speaker
Microphone
SMALL 1
Small open-back enclosure
10
Dynamic
SMALL 2
Small open-back enclosure
10
Dynamic
MIDDLE
Open back enclosure
12 x 1
Dynamic
JC-120
Open back enclosure
12 x 2
Dynamic
BUILT-IN 1
Open back enclosure
12 x 2
Dynamic
BUILT-IN 2
Open back enclosure
12 x 2
Condenser
BUILT-IN 3
Open back enclosure
12 x 2
Condenser
BUILT-IN 4
Open back enclosure
12 x 2
Condenser
BUILT-IN 5
Open back enclosure
12 x 2
Condenser
BG STACK
1
Sealed enclosure
12 x 2
Condenser
BG STACK
2
Large sealed enclosure
12 x 2
Condenser
MS STACK
1
Large sealed enclosure
12 x 4
Condenser
MS STACK
2
Large sealed enclosure
12 x 4
Condenser
MTL STACK
Large double stack
12 x 4
Condenser
2-STACK
Large double stack
12 x 4
Condenser
3-STACK
Large triple stack
12 x 4
Condenser
Mic Setting
1, 2, 3
Adjusts the location of the microphone that is recording the sound of the speaker.
This can be adjusted in three steps, with the microphone becoming more distant in the order of 1,
2, and 3.
Mic Level
0–127
Volume of the microphone
Direct Level
(*1)
0–127
Volume of the direct sound
Level
0–127
Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer to “De MFX bedienen met de PAD EDIT [1] [2]-regelaars (MFX
Ctrl)(P.204)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Het MASTER EFFECT bedienen met de MASTER
EFFECT-regelaar (MASTER EFFECT CTRL)(P.205)”.
Guitar Amp Simulator
This is an effect that simulates the sound of a guitar amplifier.