12
Using the TAIKO-1 to Hear Music Played from
a Mobile Device
Registering a Mobile Device
(Pairing)
“Pairing” is the procedure by which the mobile device that you want to
use is registered on this unit (the two devices recognize each other).
Make settings so that music data saved on the mobile device can be
played wirelessly via this unit.
MEMO
5 Once a mobile device has been paired with this unit, there is no
need to perform pairing again. If you want to connect this unit with
a mobile device that has already been paired, refer to “Connecting
an Already-Paired Mobile Device” (p. 12).
5 Pairing is required again if you execute a Factory Reset (p. 13).
5 The following steps are one possible example. For details, refer to
the owner’s manual of your mobile device.
1. Place the mobile device that you want to connect
nearby this unit.
2. Press the “MENU”
(F2 button)
.
The MENU screen appears.
3. Use the [
H
] [
I
] buttons to select “Bluetooth,” press
the “SELECT”
(F2 button)
.
The Bluetooth screen appears.
4. Use the [
H
] [
I
] buttons to select “Setup,” press the
“SELECT”
(F2 button)
.
5. Use the [
H
] [
I
] buttons to select “Bluetooth ,” and
then use the [+] [–] buttons to turn it “ON.”
If this is already “ON,” proceed to the next step.
6. Press the “PAIRING”
(F2 button)
.
The display indicates “Now Pairing...,” and this unit waits for a
response from the mobile device.
7. Turn on the Bluetooth function of the mobile device.
MEMO
The explanation here uses the iPhone as an example. For details,
refer to the owner’s manual of your mobile device.
8. Tap “TAIKO-1 Audio” that is shown in the Bluetooth
device screen of your mobile device.
This unit is paired with the mobile device. When pairing succeeds,
“TAIKO-1 Audio” is added to the list of “Paired Devices” on your
mobile device.
The TAIKO-1 screen will indicate “Connected (Audio).”
9. Press the “BACK”
(F1 button)
several times to return to
the top screen.
Connecting an Already-Paired Mobile Device
1. Turn on the Bluetooth function of the mobile device.
MEMO
5 If you were unable to establish a connection using the procedure
above, tap “TAIKO-1 Audio” that is displayed in the Bluetooth device
screen of the mobile device.
5 To disconnect, either turn this unit’s Bluetooth Audio function “OFF”
(“MENU”
0
“Bluetooth”
0
“Setup”
0
turn “Bluetooth
” OFF) or
turn the mobile device’s Bluetooth function o.
Playing Music from the Mobile Device
1. Connect the mobile device via Bluetooth.
2. On the mobile device, use a music app to play back
music.
The sound is heard from the TAIKO-1.
* To adjust the playback volume, adjust the volume on your
mobile device.
Using the Bluetooth® Functionality
To Next Page
Loading...
