Roland TAIKO-1 - Making Overall Settings for the TAIKO-1; (Others); Returning to the Factory Settings; Factory Reset

13
Here’s how to make settings that are common to the entire TAIKO-1,
such as specifying the output destination of the TAIKO-1, and making
footswitch assignments.
1. Press the “MENU” (F2 button) .
2. Use the [
H
] [
I
] buttons to select “Others,” press the
“SELECT”
(F2 button) .
The following items are shown.
Item Explanation
Output Settings
OUTPUT jack settings
&
“Reference Manual” (PDF)
Control Settings
Pedal jack and shortcut settings
You can assign functions such as kit switching
or set list switching to a footswitch (sold
separately: BOSS FS-5U, FS-6) that’s connected
to the TAIKO-1, and assign functions such as
pitch, volume, or ji-uchi tempo to an expression
pedal (sold separately: EV-5).
You can also change the function (shortcut) of
the [
] (tomoe) button.
&
“Reference Manual” (PDF)
Global MIDI
MIDI settings
&
“Reference Manual” (PDF)
Master EQ
Editing the master equalizer settings
&
“Reference Manual” (PDF)
Master Comp
Editing the master compressor settings
&
“Reference Manual” (PDF)
LCD/Auto O
Screen and Auto O settings
You can adjust the brightness of the screen, and
make other system settings.
Parameter
[
H
] [
I
] button
Value/Explanation
[+] [-] button
LCD Contrast
1–16: Adjusts the contrast of
the display.
LCD Backlight
1–16: Adjusts the brightness
of the display.
Auto O
OFF: The power does not turn
o automatically.
4 HOURS/10 MINUTES:
When four hours or ten
minutes have elapsed
without any pad being struck
or any operation being
performed, the unit will turn
o automatically.
Version Info
Viewing Information About the Unit
Shows information about the TAIKO-1 itself,
such as the program version.
Factory Reset
Returning to the Factory Settings
&
“Returning to the Factory Settings
(Factory Reset)” (p. 13)
3. Use the [
H
] [
I
] buttons to select the item, and then
press “SELECT” (F2 button) .
4. Use the [
H
] [
I
] buttons to select a parameter, and
then use the [+] [–] buttons to change the setting.
5. Press the “BACK” (F1 button) several times to return to
the top screen.
Returning to the Factory Settings (Factory Reset)
Here’s how the settings that you edited and saved on the TAIKO-1 can
be returned to their factory-set condition.
* When you execute this operation, all saved settings including the
sound parameters will be lost.
1. Press the “MENU” (F2 button) .
2. Use the [
H
] [
I
] buttons to select “Others,” press the
“SELECT”
(F2 button) .
3. Use the [
H
] [
I
] buttons to select “Factory Reset,”
press the “SELECT”
(F2 button) .
A conrmation message appears.
If you decide to cancel, press the “CANCEL” (F1 button).
4. To execute, press the [+] button.
Making Overall Settings for the TAIKO-1 (Others)