Roland TD-11 User Manual

15
Quickly Editing an Instrument (QUICK EDIT)
The TD-15’s QUICK EDIT function lets you make quick and easy adjustments to the sound of each instrument.
1. Before you continue, select the drum kit that contains the instrument you want to edit.
2. In the DRUM KIT screen (p. 11), press the [QUICK EDIT] button.
Each time you press the button, you’ll cycle between “Tuning,” “Muing,” and “Strainer,” and then return to the DRUM KIT
screen.
The pad being edited
3. Strike the pad whose instrument you want to edit.
The screen will show the edit screen for the pad you struck.
4. Use the value dial to edit the value.
Parameter Value Description
Tuning -240–+240 Negative (-) settings will lower the pitch, and positive (+) settings will raise the pitch.
Muing 0–50 Larger values will reduce the resonance and emphasize the attack.
Strainer 1–10 Strainer (snare) tension. Higher values make the tension tighter.
Snare Buzz 0–10 Resonance of the snare. Higher values increase the resonance.
* The editable parameters will dier depending on the instrument group.
5. Press the [EXIT] button to return to the DRUM KIT screen.

Roland TD-11 Specifications

General

Type	Drum Module
Sound Engine	SuperNATURAL
Kick Pad	KD-9
Hi-Hat	CY-5
Kits	50
Effects	Ambience
Outputs	L/Mono, R, Phones
MIDI	In, Out
USB	Type B (MIDI)
Connectivity	Phones jack: Stereo 1/4-inch phone type, Output jacks (L/MONO, R): 1/4-inch phone type, Input jack: Stereo miniature phone type, USB COMPUTER port: USB Type B, USB MEMORY port: USB Type A, MIDI (IN, OUT)
Snare Drum	PDX-8
Tom Pads	PDX-6
Hi-Hat Control Pedal	FD-8
Crash Cymbal	CY-8
Drum Stand	MDS-4V
Sound Kits	50
Pads	snare, toms, kick, hi-hat, crash, ride