Roland TD-11 - Viewing USB Flash Drive Information; Formatting USB Flash Drive

Settings for the Entire TD (SYSTEM)
40
Viewing Information About the
USB Flash Drive (Information)
Here’s how to view information about the USB ash drive.
Parameter Description
Backups Number of data backups
Kits Number of saved drum kits
Size Used
Amount of memory used on the USB
ash drive
1. Choose “Information“ and press the [F3] (ENTER)
button (p. 38).
2. When you’ve viewed the information, press the
[F3] (OK) button to close the screen.
Formatting a USB Flash Drive
(Format)
NOTE
When you execute the Format operation, all data on
the USB ash drive will be erased.
1. Choose “Format“ and press the [F3] (ENTER)
button (p. 38).
2. Press the [F3] (FORMAT) button.
A conrmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
3. If you’re sure that you want to format the USB
ash drive, press the [F3] (OK) button.
Once again, a conrmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
4. If you’re sure that you want to format the USB
ash drive, press the [F3] (OK) button.
When formatting has been completed, the screen will
indicate “Completed.”