I
If you wish to monitor the
rhythm patterns you are
programming
into
a
Track, push the Start/Stop Key
I
When
you
have written
a
wrong rhythm pattern,
go to the bar where you made a mistal<e by using
the Measure Back l<ey or
Measure FonA^ard
Key
®,
with
the aid of the Display. Assign the correct
rhythm pattern, then
hit the Enter
Key ®.
Measure-
Back Key
I
Select the rhythm pattern to be played at the 1st
bar.
In this example score, A-7 {pattern group A,
pattern number
7)
should be selected.
p"
Q y
gOp
oQ
O O
Measure
Forward Key
®
Push the Enter Key
®.
iWhen
you have completed to
program
up to
the
last bar, stop playing by pushing the Start/Stop
Key.
The rhythm pattern A-7 is now written into the 1 st
measure.
The Display now shows the 2nd measure.
E
Track Playing
]
Now, let's play the Track you have written.
®
Push the Mode
Key to
turn
to
the Track Playing
mode.
I
Select the rhythm pattern to be played at
the 2nd
bar. Here, it is the same as the one before
(A-7),
so
skip
and
hit the Enter Key
®.
The 3rd bar is the
same
case as
the 2nd bar.
>The rhythm pattern to
be
played for the 4th bar is
A-11, so assign the pattern number 11, then hit
the Enter
Key.
(Write the 5th to 16th bars
as
above.
I
Push the Start/Stop Key.
The composer plays the rhythm patterns from the
first bar, and when plays up to the
last bar, starts
playing from the first bar
again.
>To stop playing, push the Start/Stop Key.
If you want to play the Track just
once, write
several blanks after
the last bar
of the Track, and
push the Start/Stop Button while the blank
bars
are playing.
?7
To Next Page
Loading...
