Roland TR-505 - Verification

b. Verification
Change the connection of the tape recorder and the
composer to
as
shown below. (The
same jack is used
on the TR-505.}
Tape In/Out Jack
Headphones
Jack
Earphones
Jack
TR-SOS
T-r-
1
1
•^^
°
(
1 1 1 1 1
1
O
*_J
U
o
1
rV
®
Play back the tape, and start the
tape
recorder
from where
you
hear
the pilot tone.
) While holding the Shift
Key
®
down, push the
Verify Key {Main Key
15),
then the Enter Key.
On pressing the Verify Key, the display responds
with:
CLOSED
m-MAT
While
holding down
Q
^'j:|jlii^'^
When verification starts,
the Tempo Indicator
lights
up.
To stop verification during verifying,
push the
Main Key 1
.
When the saving has not been properly done, error
indication
as
shown below will
appear in
the
Dis-
play.
!f this happens, stop the tape recorder, and
repeat
the verification
with a
different volume setting.
If the error indication still remains no matter how
many times you try, repeat
saving procedure. If it
is still not remedied, try saving with a
different
tape recorder.
36