Roland TR-505 - Copy; Last; Down

d. Copy
You can copy a sequence of rhythm patterns you
have written in
a
Track.
®
Enter the Track Writing mode.
©Assign the bar number from which you
wish the
new patterns
to
begin,
by
holding the Shift Key
down while pushing the appropriate Main Key,
then push the Enter Key.
[
Functions in Track Playing Mode
]
e. Playing
Track from the bar
you
like
(D
Call the bar from which you wish the Track to play,
as
shown in
"a.
Assigning a Bar" on page 28.
®
Push the Start/Stop
Key
©
while holding the Shift
Key
(D
down.
The Track will play from the bar you have
assigned.
'While holding the Shift
Key
down, push the
Copy
(Main
Key 1
1
),
the appropriate Main Keys
(1
to 1
0)
assigning the starting bar number, the Enter Key,
and the ending bar number, then the Enter Key. Be
sure that all are done while the Shift
Key
is being
held down. (Refer
to
the example
copy on page
34.)
f. Last Measure
When the composer is stopped, hold the Last
Mea-
sure Key
®
down. The last bar number of
the Track
currently selected
and its rhythm pattern are shown
in the Display.
'
You cannot copy to the bar number that is included
in the sequence of the bars
to be
copied. For
example,
you
cannot
copy bars 5 to 10 to the
bar 9.
•
You cannot
copy the bars in a Track to a different
Track.
-
inst/metro
n
LAST
MEAS
NOTE
When
you
have taken
a wrong operation, the Display
responds with:
TRACK
PATTERN
MODE
f
1
D
1
1
PATTERN
PLAY
Repeat the
copying procedure correctly.
[
Functions available in any mode
]
g.
Start/Stop with the Pedal Switch
Connect the pedal switch as
shown below, and the
composer can
be
started or stopped by pressing the
pedal.
29