3. Using the
TR-505 as a
MIDI sound
module
®
Set the
composer to OMNI
OFF mode.
When
using only one
transmitter,
you
can skip the
step 1
and 2.
1
Match the MIDI
channel numbers of the
transmit-
ters to the
composer's receive channel.
I
Match the
transmitters and the key
numbers of
the composer.
The volume of the
drum sound is
determined
by
the MIDI
Velocity messages. It is
not affected by
the level set
on the TR-505.
4.
Transmitting MIDI message
from
the compsoer
In such a setup as
belov^', the MIDI messages
sent
from
the composer are received by
the connected
instruments such
other rhythm machine and
synthes-
izer, making them sound.
'
1
'
OUT
TR-505
IN THRU
Keyboard
JUNO-106
JX-8P JX-3P
IN THRU
Keyboard
JUNO-106
JX-8P
IN
Rhythm Machine
TR-707
TR-727
Receive
channel 11
Receive channel 12
Receive
Channel 13
®
Set the
receivers
to
OMNI OFF mode.
I
Match the transmit
MIDI channel of each drum
voice to the receiver's
MIDI channel.
t
Match
the
key
numbers of the
composer to the
receivers.
The volume
of each drum voice set on
the com-
poser does
not affect receiver's volume.
This can be
useful for listenning to the
sounds of the
external
instruments with the composer's
volume
set to
0.
42
To Next Page
Loading...
