Roland TR-626 - Page 67

MIDI Function
11 Alternating the SYNC mode
Step 1
Check the MIDI function as explained in "Checking the MIDI function"
on p. 78 and have the display indicate the current SYNC mode
setting.
,-
=,,,c
,-
or
Step 2 Push the Up Key and the Down Key to change the SYNC mode.
MODE
Down key (Tape SYNC)
Up key
,-
LCI
=,,,c
,_ ,
.-
=,,,c
,,,,
,-
=,,,c
,-
c,,-
TRACK PLAY
EXT SYNC
MODE
TRACK PLAY
EXT SYNC
MODE
TRACK PLAY
• Operates using the synchronous signal
that comes through TAPE SYNC IN JACK
(MIDI SYNC)
• Operates using the external synchronous signal
that comes through MIDI IN CONNECTOR
(SYNC OFF)
• Operates at the tempo set by the main unit
When the TR --626 is syncing to ex tern al devices, EXT SYNC will
appear in the display. When you make the Display show tempo, the
following sync mode is also dispalyecl.
TEMPO
'
,-, ,-, Cl
(MIDI SYNC)
TEMPO
,_ c,
,_ ,
(TAPE SYNC)
87