Roland TR-626 - Page 70

MIDI Function
■ Altering the transmission channels for individual sound modules (Channels 1 to 16)
Step 1
Step 2
Step 3
90
Transmission channels can be set individually for each sound source.
This allows for more than one MIDI sound source to be controlled
separately by the TR-626. Please note that from the manufacturer,
all of the sound sources were set to Channel 10.
Check the MIDI function as explained in "Checking the MIDI function"
on p. 78 and have the display indicate the transmission channel
settings.
I- ,.-1-,
,,-,
- -
,,_,
Push the Main Key of the sound source of the transmission channel
you would like to change. The display will indicate the designated
sound source transmission channel.
Push the Up Key when you would like a higher transmission channel
than the one currently set. Push the Down Key when you would like
a lower channel.
Transmission channel can be set from 1 to 16.