Roland TR-626 - Page 73

Step 4
MIDI Function
When the transmission and the reception of data is being carried out
correctly, the receiver TR- 626 will display the following :
,.-
C =,c
,- =
After completely transferring data, both the transmitter and the
receiver return to their normal states.
*Transferring data is completed in about 5 seconds.
When an error occurs, the receiver TR - 626 will display the following
and will stop receiving the data :
.-
c ,-,-
*To stop the transmission or the reception of data that has already
begun, push the Start/ Stop Keys of both the transmitter and the
receiver.
* If you would like to transfer data written in Memory Bank 2 or 3, that
is in a Memory Card, first copy the data to Bank 1 as explained in
"Copying data between banks" on p. 68, and then carry out the above
operation.
93