Roland TR-626 - MIDI Function

Before calling the Repaires
Symptom
Drum Voice
e No sound is heard.
e Tone of the sound is strange.
e Level and pitch cannot be adjusted.
Writing
e Writing The unit cannot enter
the writing mode.
e A rhythm pattern cannot be written.
e The drum voice you have written
is erased.
e Shuffle cannot be obtained.
e Flam cannot be written.
e Flam cannot be set.
Tape Memory
e Verification and loading cannot
be done.
Possible cause
0 The level of the drum voice is set to 0. (P.16)
OThe overall volume is set to the minimum. (P.14)
0 The pitch of the drum voice is not set properly.(P.18)
OThe drum voice you want is not assigned to the Main key.
(P.11, 12)
OThe Protect Switch is set to ON in Memory Banks 2 or
3. (P.65)
0 The Protect Switch is set to ON in Memory Banks 2
or 3. (P.65)
0 The unit is set to the Manual Play mode. (P.28)
0 The unit is set to the Level/Pitch mode. (P.16, 18)
OThe unit is set to the accent writing mode of the Step
writing mode. (P.32)
0 You have written the drum voices of the same group
in one step. (P.9, 30, 32, 34)
0 The scale is set to the triplet or its multipe.
(P.43, 52)
OThe drum voice other than SD1 /2/3, L T1 /2, MT1 /2
or HT 1 / 2 is selected. ( Flam can be written only in these
drum voices.) (P.49)
0 The flam interval is set to 0. (P.50)
0 Connections are not made properly. (P.72, 74)
OThe output level of the tape recorder is not appropriate.
(P.73)
OYou have used different tape recorders for saving and
loading. (P.74)
0 The recording level during saving was not appropriate.
0 The tape used is damaged. (P. 73, 71)
97