Roland TR-626 - Page 93

Start
Status
FAIi
When Sync mode is set al V,JD!, the TH -- C26 slarts running on the
Start mess~1gc.
Continue
Stop
Status
FBfl
Status
FCH
When Sync mode is sel at \11DI, the TH 62G starts conlinue play
upon receiving this message.
When Sync mode is sel al MIDI, the TH---626 stops upon receipt of
this message.
3. EXCLUSIVE COMMUNICATIONS
See the TR-626 Owner's Munua! for send rccei\'c procedures of the exclusive
messages.
One way communication
■ Data set
When recognized, the following messages are stored internally.
~ Description
FOH Exclusive status
41H Robnd-lD
ObH Devicc-ID=MIDI 8asic channel
!Dfl Model-ID ('rn - 626)
12H Command- ID (DTI)
aal-1 Address (MSB)
bbH Address (LSB)
ddl-1 Data dd--001l-7FH
ddH Data
ssH Sum ss: aall I bbll I ddfl I ... lddfl 1-ssH~0
F7H EOX (End of Exclusive)
■ Address mapping of data
With the TR-626 the following dala for memory bank l are available for send//
receive of exclusive messages.Pattern, track, and the !eve! and pitch of each voice
Address
Description
aaH (MSB) bbH
(LSB)
OOH 20H data start address
data
2DH 10!! data end address
113