Roland V-Drums TD-27 - Recording to a Computer; Recording on a Connected Computer; Installing the USB Driver

19
Performing
Using Set Lists
1. Press the [DRUM KIT] button.
The DRUM KIT screen appears.
2. Press the [F1] button.
The set list turns on.
3. Press the [F1] (
K
SET LIST) button or [F2]
(SET LIST
J
) button to select the set list that
you want to use.
4. Use the dial to select drum kits in the order of
the specied steps.
5. When you’ve nished playing, press the
[DRUM KIT] button or the [EXIT] button.
The set list function turns o.
MEMO
5 You can assign the appropriate function to a footswitch
or pad, and use it to recall set lists or drum kits. For
details, refer to “Assigning Functions to Footswitches or
Pads (CONTROL)” (p. 60).
5 If there are discrepancies between the volumes of each
drum kit, adjust the volume of the entire drum kit (p. 31).
5 To return from the SET LIST screen to the DRUM KIT
screen, press the [DRUM KIT] button or the [EXIT]
button.