Roland V-Drums TD-27 - Copying Settings (COPY)

43
Editing a Drum Kit
Copying Settings (COPY)
The TD-27 lets you copy settings for a drum kit or for an
individual pad from user memory or an SD card.
NOTE
When you execute a copy operation, the contents of
the copy-destination are overwritten. If the destination
contains settings that you want to keep, back them up to
an SD card (p. 47).
1. Press the [KIT EDIT] button.
The KIT EDIT screen appears.
2. Press the [F5] (OTHER) button.
The KIT EDIT OTHER screen appears.
3. Use the cursor buttons to select the “COPY”
and press the [ENTER] button.
The COPY MENU screen appears.
4. Use the cursor buttons to select an item in
the copy menu, and then press the [ENTER]
button.
Copy menu Explanation
COPY KIT Copies the settings of a drum kit.
COPY PAD
Copies the settings of a pad (such as the
instrument assignments).
5. Copy the settings according to the menu item
that you selected.
Example 1) Copying a Drum Kit (COPY KIT)
1. In the COPY MENU screen, select “COPY KIT”
and then press the [ENTER] button.
The COPY KIT screen appears.
2. Press the [F1] (USER)–[F3] (SD CARD) buttons
to select the item that you want to edit.
Button Explanation
[F1] (USER)
Copies from user memory. Only if the
copy-source is user, you can exchange
the copy-source and copy-destination.
Button Explanation
[F2] (PRESET)
Copies drum kits of preset memory.
Choose this if you want to return to the
factory-set drum kit settings.
* User samples that are assigned to a
factory-set drum kit cannot be copied.
[F3] (SD CARD)
Copies drum kits from backup data saved
on an SD card.
3. Use the cursor buttons to select the
parameters, and use the dial to specify the
copy settings.
USER PRESET
Copy-source
Copy-destination User sample icon
(shown only if a drum kit that
uses user samples (p. 35) is
selected)
SD CARD
Copy-source
Copy-destination
Copy-source bank number
Include or don’t include user samples
User sample icon
* If you are copying backup data that does not include user
samples, you can’t select the “With User Sample” check box.
4. Press the [F5] (COPY) button.
By pressing the [F4] (EXCHANGE) button you can
exchange user memories (USER only).
A conrmation message appears.
If you decide to cancel, select “CANCEL” and press the
[ENTER] button.
5. Use the cursor buttons to select “OK,” and
press the [ENTER] button.
The drum kit is copied.