44
Editing a Drum Kit
Example 2) Copying a pad (COPY PAD)
1. In the COPY MENU screen, select “COPY PAD”
and then press the [ENTER] button.
The COPY PAD INST screen appears.
2. Press the [F1] (USER)–[F3] (SD CARD) buttons
to select the item that you want to edit.
Button Explanation
[F1] (USER)
Copies from user memory. Only if the
copy-source is user, you can exchange the
copy-source and copy-destination.
[F2] (PRESET)
Copies instruments of preset memory.
Choose this if you want to return to the
factory-set drum kit settings.
* User samples that are assigned to a
factory-set drum kit cannot be copied.
[F3] (SD CARD)
Copies instruments from backup data saved
on an SD card.
3. Use the cursor buttons to select the
parameters, and use the dial to specify the
copy settings.
USER PRESET
Instrument set to copy
Copied contents
(Copy Target)
Copy-source
Copy-destination
User sample icon
(shown only if a drum kit that
uses user samples (p. 35) is
selected)
SD CARD
Instrument set to
copy
Copied contents (Copy Target)
Copy-
source
Copy-destination
Copy-source bank number
Include or don’t include user samples
User sample icon
* If you are copying backup data that does not include user
samples, you can’t select the “With User Sample” check box.
Copied contents (Copy Target)
Value Explanation
with Pad EQ/
Comp
All pad-related settings (such as instrument, EDIT,
volume, ROOM/OVERHEAD send, and Pad EQ/
Comp) are copied.
Inst/VEdit
Only
Of the pad settings, settings other than Pad Eq/
Comp are copied, such as instrument settings (e.g.,
instrument, EDIT), volume, and ROOM/OVERHEAD
send.
Pad EQ/
Comp Only
Of the pad settings, only the pad equalizer (p. 31)
and pad compressor settings (p. 32) are copied.
4. Press the [F5] (COPY) button.
By pressing the [F4] (EXCHANGE) button you can
exchange user memories (USER only).
A conrmation message appears.
If you decide to cancel, select “CANCEL” and press the
[ENTER] button.
5. Use the cursor to select “OK,” and press the
[ENTER] button.
The instrument is copied.
To Next Page
Loading...
