Roland V-Drums TD-27 - Checking the Usage Status of an SD Card (INFO); Formatting an SD Card (FORMAT)

50
Making Various Settings (SYSTEM)
Checking the Usage Status of an SD Card
(INFO)
Here’s how to check the number of settings that are saved
on the SD card.
1. Insert an SD card into the TD-27 (p. 11).
2. Press the [SYSTEM] button.
The SYSTEM screen appears.
3. Use the cursor buttons to select the “SD CARD”
and press the [ENTER] button.
The SD CARD MENU screen appears.
4. Use the cursor buttons to select the “INFO”
and press the [ENTER] button.
The SD CARD INFO screen appears.
Parameter Explanation
Backup All Number of saved backup data
1 Kit Number of saved kit backup data
5. Press the [DRUM KIT] button to return to the
DRUM KIT screen.
Formatting an SD Card (FORMAT)
Here’s how to format an SD card.
* Before using an SD card for the rst time with the TD-27,
you must format the SD card.
NOTE
When you format an SD card, all data on the SD card is
erased.
1. Insert an SD card into the TD-27 (p. 11).
2. Press the [SYSTEM] button.
The SYSTEM screen appears.
3. Use the cursor buttons to select “SD CARD,”
and press [ENTER] button.
The SD CARD MENU screen appears.
4. Use the cursor buttons to select “FORMAT,” and
press [ENTER] button.
A conrmation message appears.
5. Press the [F5] (FORMAT) button.
A conrmation message appears.
If you decide to cancel, select “CANCEL” and press the
[ENTER] button.
6. Use the cursor buttons to select “OK,” and
press the [ENTER] button.
The SD card will be formatted.