Roland V-Drums TD-27 - Editing a Drum Kit - Kit Edit Button; Editing with the [KIT EDIT] Button; Parameter Settings Explained

21
Performing Along with a Song
Performing Along with a Song
All types of music that can be played back by the TD-27, including its built-in songs, audio les saved on an SD card, and
performance data recorded to an SD card are collectively called “songs.”
Types of song Explanation
Built-in songs
(INTERNAL)
Backing songs (audio data) built into
this unit, and demo performances
for previewing the drum kit sounds
(preview)
Songs saved on an SD card
(SD CARD)
Audio les (WAV/MP3) saved to an
SD card for backing
Songs recorded on an SD
card
(REC DATA)
A TD-27 performance saved
(exported) as audio data to an SD
card
1. Press the [SONG] button.
The SONG screen appears.
2. Turn the dial to select a song.
Each time you press the [F1] button, you cycle between
built-in songs (INTERNAL), audio les on the SD card
(SD CARD), and songs recorded (exported) to the SD card
(REC DATA).
3. Press the [
s
] button.
The selected song plays.
Operations during playback
[
s
] button
Play/stop the song
[ ][ ] buttons
Fast-forward [ ] / Rewind [ ] the song
[ ] button
Move to the beginning of the song
Use the [ ] button to
move the cursor to
“SPEED”
&
dial
Make the song’s playback speed faster
(rotate right) or slower (rotate left)
[F4](A-B) button
Successively switch between loop
playback, normal playback, and A-B
repeat.
Reference
For the list of built-in songs, refer to “Data List” (PDF).
Repeatedly Playing a Specied Region
(A-B Repeat)
You can make a specied region of the song repeat. This is
convenient when you want to practice the same section of a
song repeatedly.
* You can’t specify A-B repeat for an internal drum
performance song.
A B
1. Select and play a song.
2. In the SONG screen, press the [F4] (A-B)
button at the location where you want to start
repeating.
The character “A” appears.
MEMO
You can use the [
] / [ ] buttons to move backward or
forward in ve-second steps. Hold down a button to
rewind or fast-forward.
3. At the location where you want to stop
repeating, press the [F4] (A-B) button.
The character “B” appears, and the region of the song
between “A” and “B” plays repeatedly.
Press the [F4] (A-B RPT) button to return to normal
playback.