Roland V-Drums TD-27 - Page 37

37
Editing a Drum Kit
Specifying the Sounded Region of a User
Sample
You can specify the region of a user sample that is actually
sounded.
1. From the user sample list, select the user
sample for which you want to make the
setting.
1. Press the [F2] (START/END) button.
2. Use the cursor buttons and the dial to edit the
values.
Parameter Explanation
Zoom
Zooms the waveform display in or out.
You can zoom-in/out on the horizontal axis by
holding down the [ENTER] button and pressing
the cursor [
] [ ] buttons.
You can zoom-in/out on the vertical axis by
holding down the [ENTER] button and pressing
the cursor [
] [ ] buttons.
Start
Adjusts the start point (the location at which
the user sample starts playing).
End
Adjusts the end point (the location at which the
user sample stops playing).
Deleting a User Sample
Here’s how to delete a user sample.
1. From the user sample list, select the user
sample that you want to delete.
2. Press the [F3] (DELETE) button.
A conrmation message appears.
If you decide to cancel, select “CANCEL” and press the
[ENTER] button.
3. Use the cursor buttons to select “OK,” and
press the [ENTER] button.
The user sample is deleted.
Renaming a User Sample
Here’s how to rename a user sample.
1. From the user sample list, select the user
sample that you want to rename.
2. Press the [F4] (NAME) button.
3. Edit the name (p. 39).
4. Press the [F5] (EXIT) button to exit the SAMPLE
NAME screen.