Roland VS-1680 - Phrase New

154
Chapter 10 Track and Phrase Editing
fig.04-56a
Phrase New
You can create a new phrase any time you wish from any
recorded take in the song.
Creating a New Phrase
1. Press [PLAY (DISPLAY)].
2. Hold down [SHIFT] and press [F2 (TRACK)].
3. Press [F1 (Tr/Ph)] so that the Phrase Edit Menu appears.
4. Press [PAGE] so that [F3] indicates “New,” and then
press [F3 (New)].
5. Press [F1 (Take)].
6. At this time, pressing [F3 (Sort)] will switch the order in
which the takes are sorted, cycling through the following
choices.
HIST: The order in which the takes were recorded
V.Tr: The order of the V-Tracks on which the takes
are recorded
NAME: The alphabetical order of the take names
fig.6-05.e
7. Use the TIME/VALUE dial to select the take that will be
the basis of the newly created phrase.
8. Press [F4 (Sel)] or [ENTER (YES)].
9. Use [ ], [ ], [ ], and [ ] to move the
cursor, and use the TIME/VALUE dial to set the
parameters.
TO Time
Phrase 2
Phrase 2
Phrase 1
Phrase 1
The order in which the takes were recorded
The order of the V-tracks on which the takes are recorded
The alphabetical order of the take names