Roland VS-1680 - Track Mixer; Switching the Fader Functions

30
Chapter 1 Before You Start (VS-1680 Terminology)
Track Mixer
The Track Mixer is placed after the recorder section, and corresponds to Tracks (1–15/16).
fig.01-11
All of the tracks are output from the MASTER jacks. Additionally, tracks can also be routed back to the RECORDING bus for
overdubbing, or re-recording. The channel faders 1–15/16 correspond respectively to Tracks 1–15/16
Switching the Fader Functions
On the VS-1680, it is possible to adjust Input Mixer or Track Mixer settings by switching the function of the channel faders on the
top panel. Pressing [FADER] on the top panel toggles the function of the channel faders between controlling the Input Mixer and
the Track Mixer. The button indicator indicates which mixer is currently selected.
fig.01-12