2—Version Two Enhancements
14 www.Roland.com Roland VS-2000 Owner’s Manual, Version Two Addendum
Recovering a backed-up project from your computer
1. Start up USB Storage Mode as described in “Establishing a connection to your
computer” (
Owner’s Manual
Page 82).
2. As described in “VS-2000 icons” on Page 11, double-click the “VS-2000 icon” for the
recovery-destination partition (i.e., the partition to which you will be recovering the
project). The folders and files in the VS-2000’s internal hard disk will be displayed.
3. Copy the entire backed-up folder into the “PORT folder.”
The backed-up project will be recovered into the VS-2000’s internal hard disk.
4. Exit USB Storage Mode as described in “Terminating the connection to your
computer” (
Owner’s Manual
Page 84).
5. Access the Project List screen (
Owner’s Manual
Page 99), and verify that the Recover
operation was successful. The recovered project will be added at the end of the
project list in the recover-destination partition.
Backing up and Recovering User Rhythm Arranges or
Rhythm Patterns
You can back up and recover user rhythm arrangements and patterns in the same way
as when backing up and recovering a project. Simply back up and restore the following
files.
• USRRHPAT.VS2 file (User rhythm patterns)
• USRRHARR.VS2 file (User rhythm arrangements)
Before copying the backed-up project into the “PORT folder,” you must disable the
“read-only” attribute from the folder and the files it contains.
User Rhythm Arrangement/Pattern data files are shared by all projects in the partition.
Be aware that when you recover these files, the existing user rhythm arrangement/
pattern data files will be overwritten.
[Example] Windows 2000
Copy the entire
backed-up
“SONGxxxx.VS2
folder” into the
“PORT folder.”
VS2000v2Add.book 14 ページ ２００５年４月８日 金曜日 午後２時２４分
To Next Page
Loading...
Need help?
General
