Roland VS-2000 - Backing up a Project on Your Computer

2—Version Two Enhancements
Roland VS-2000 Owner’s Manual, Version Two Addendum www.RolandUS.com 13
Backing up a project on your computer
1. Start up USB Storage Mode as described in “Establishing a connection to your
computer” ( Owner’s Manual Page 82). After a time, your computer will detect the
VS-2000’s internal hard disk.
2. As described in “VS-2000 icons” on Page 11, double-click the VS-2000 icon for the
partition that contains the project you want to back up. The files and folders on the
VS-2000’s internal hard disk will be displayed.
3. Copy the entire folder “SONGxxxx.VS2” for the project you want to back up onto
the hard disk of your computer. The project data will be copied to your computer.
4. Exit USB Storage Mode as described in “Terminating the connection to your
computer” ( Owner’s Manual Page 84).
You must not rename or rewrite the folders or files backed up to your computer. Doing
so will make it impossible to recover the data correctly.
[Example] Windows 2000
<< Project and folder names >>
The data for each project is
saved in a separate folder
named “SONGxxxx.VS2”.
The “xxxx” portion of the
folder name will be a number
in the order of the projects
shown in the project list.
[Example] Windows 2000
Copy the entire
“SONGxxxx.VS2”
folder.
VS2000v2Add.book 13 ページ ２００５年４月８日 金曜日 午後２時２４分