Roland VS-2000 - Roland VS-2000 Owners Manual, Version Two Addendum Www.rolandus.com

6—VGA Main Display CH VIEW Screens
Roland VS-2000 Owner’s Manual, Version Two Addendum www.RolandUS.com 65
EQ
1. EQ On/Off Button
Turn the channel EQ on or off by clicking this button—when it’s blue,
the EQ is on.
2. RESET Button
Click RESET to return the EQ parameters to their factory default settings.
3. Interactive EQ Display
Draw the desired EQ curve by clicking and dragging on any of the red triangles to set
the corresponding EQ band.
4. EQ Meters
The EQ meters show the level the signal as it comes into the channel EQ and as it leaves
it.
EQ Parameters
The CH VIEW EQ parameters are described on Owner’s Manual Page 162.
1. 2.
3.
4.
VS2000v2Add.book 65 ページ ２００５年４月８日 金曜日 午後２時２４分