2—Version Two Enhancements
16 www.Roland.com Roland VS-2000 Owner’s Manual, Version Two Addendum
The MASTER EDIT screen
Function button
F4 (FX RTN)
has been added (the LCD display only). Press
F4 (FX RTN)
the FX return Parameter View screen (
Owner’s Manual
Page 231). When this screen
appear, the FADER parameter is displayed as default.
CH PARAMETER LEVEL knob
You can use the CH PARAMETER Level knob to adjust the Ratio of the DYN parameter
(
Owner’s Manual
Page 167).
New Shortcuts
A variety of new shortcuts have been added in Version Two.
In addition, when the CH EDIT VIEW screen or the Parameter View screen is displayed:
CH PARAMETER Knob: Expander parameter: Compressor parameter:
LEVEL knob Ratio Level
Hold down: To:
CLEAR and press CH EDIT switches the UTILITY menu’s Rtn TO Tr STATUS
Sw on/off parameter (
Owner’s Manual
Page 379).
CLEAR and
turn the TIME/VALUE dial
When the CH EDIT VIEW screen or the Parameter
View screen is displayed, this edits the following
parameters for each mixer.
Hold down: To:
CLEAR and
turn the TIME/VALUE dial
edits the following parameters for each mixer.
•
Track Mixer
—V-TRACK, MIX Switch, SOLO
Switch, MUTE Switch
•
Input Mixer
—MIX Switch, SOLO Switch,
MUTE Switch
•
Effect return Mixer
—MIX Switch, SOLO
Switch, MUTE Switch
The mixer channel that is edited will be the mixer for the current channel. You will need
to select the parameters that will be affected.
VS2000v2Add.book 16 ページ ２００５年４月８日 金曜日 午後２時２４分
To Next Page
Loading...
Need help?
General
