Roland VS-2000 - Page 54

5—VGA Main Display Home Screen
54 www.Roland.com Roland VS-2000 Owner’s Manual, Version Two Addendum
Click the control panel’s SCENE tab to display the Scene pane.
Use the Scene pane for scene operations. To:
• change scene banks —click the desired bank’s number.
• store a scene —set up your mixer settings as desired and click the number of an
unused scene position.
• recall a scene —click the scene’s number.
• clear a scene—hold down CLEAR on the VS-2000 and click the scene’s number.
To name a scene—or perform other scene operations—click the SCN buttons (Page 38),
respectively.
Select scene banks
with these buttons.
Perform scene
actions by clicking
these buttons
VS2000v2Add.book 54 ページ ２００５年４月８日 金曜日 午後２時２４分