19
Getting Ready
Quick Start
9
Press [EXP D] or [EXP E], and verify that you can select
patches from Wave Expansion Boards D or E. [EXP D] or [EXP
E] indicator will light, and the following display will appear.
fig.Q-04
The example here depicts
what you would see if the
SR-JV80-13 “Vocal
Collection” Wave
Expansion Board were
installed in the EXP-D slot.
If you can’t choose any
Wave Expansion Board
patches, it’s possible that
the installed Wave
Expansion Board is not
eing recognized correctly.
Turn off the power as
described in “Turning Off
the Power”
(p. 26), and
re-install the Wave
Expansion Board correctly.
To Next Page
Loading...
