21
Item Description
Motion Detection If disconnected from power when the device is powered on,
the system alert message “Wait for 10 seconds to enter
Motion Detection, or press OK key to power off.” This
means the system will be displayed on the screen. This me-
ans the system will enter Motion Detection automatically in
10 seconds, when the device detects any motion in front of
lens or detects any external vibration, Video Record will be
10 seconds, if the screen detects any vibration, the device
will keep recording next 10 seconds until the vibration
stops. If press OK within 10 seconds, the device will be
powered off instead of entering Motion Detection mode.
Off No parking monitoring activated.
Note:
1. When the battery is fully charged and is in good condition, Motion
Detection can record continuously for about 20 minutes
2. As the device is used, the battery storage capacity will decrease gradually.
This is a normal phenomenon for the battery.
3. The recording under parking mode will be all saved in emergency
recording file.
To Next Page
Loading...
