To Next PageTo Next Page
Need help?Do you have a question about the Roller Comet and is the answer not in the manual?
General| Brand | Roller |
|---|---|
| Model | Comet |
| Category | Soldering Gun |
| Language | English |
Lists article numbers for the ROLLER'S Comet Turbo soldering torch, available in cardboard or steel case.
Describes the ROLLER'S Comet as an acetylene torch for brazing, soft soldering, heating, annealing, and other thermal processes.
Specifies Acetylene as the permitted gas for the ROLLER'S Comet torch.
States the recommended operating gas pressure for the ROLLER'S Comet is 1 bar (14 psi).
Details the gas consumption rate for the ROLLER'S Comet torch.
Provides the output rating for the ROLLER'S Comet torch in kJ/h and BTU.
Specifies the flame temperature achievable with the ROLLER'S Comet torch.
Reports the workplace-related noise level for the ROLLER'S Comet torch.
Instructions for securely connecting the gas cylinder, pressure regulator, flashback arrester, and hose to the torch.
Guides on operating the acetylene soldering torch, including trigger use, locking button, and flame adjustment.
Details recommended soldering materials (Lot P6, Lot Cu3, Paste Cu3) and their application for brazing and soft soldering.
Procedure for replacing torch nozzle, pipe, or spark generator by disassembling the housing.
Troubleshooting steps for ignition or weak flame issues, including checking gas supply, pressure, hose, and nozzle.
Diagnoses issues when the torch won't ignite automatically, pointing to a defective spark generator (piezo igniter).
