Romer DUO plus - Removing the Cover

GB
18
8.1. Removing the cover
 Open the buckle 17 and loosen the
harness straps as much as possible (refer
to 4.2).
 Take the elastic seam of the cover from
the hooks in the seat shell.
17
 Press the button of the shoulder belt
height adjuster 14 at the rear of the seat
shell and tilt the shoulder belt height
adjuster 14 forward.
 Now slide the belt loops of the shoulder
pads 11 from the extension 31 of the
shoulder belt height adjuster 14.
11
31
14
 Unhook the shoulder belts 10 at the rear
of the seat shell from the yoke 13.
Ensure that the unhooked yoke 13 does
not slip behind the shell into the base (for
instance when putting the belt end 16)
10
13
 Pull the shoulder belts 10 and belt loops of
the shoulder pads 11 out of the pair of
slots 12.
 Remove the shoulder pads 11 from the
shoulder belts 10.
 Take the belt end 16 and the crotch belt
20 (with buckle 17 and belt pad 21) out of
the cover.
11
10
17
21
20
16
 Pull the cover upward and detach it at the
square hole from the head pad 35.
 Take the shoulder belts 10 (with buckle
tongues 19) out of the cover.
 Take the cover of the head pad 35 off.
35
part number: 09163186 ( GM ) / 93181287 ( Vauxhall )