Romer DUO plus - Removing the Belts (Left and Right)

GB
20
 Fold the fabric cover over the outer edges
of the seat shell.
 Fasten the elastic seam of the fabric cover
with the hooks on the seat shell.
8.3. Removing the belts (left and right)
 Open the buckle 17 and loosen the
harness straps as much as possible (refer
to 4.2).
17
 Press the button of the shoulder belt
height adjuster 14 at the rear of the seat
shell and tilt the shoulder belt height
adjuster 14 forward.
 Now slide the belt loops of the shoulder
pads 11 from the extension 31 of the
shoulder belt height adjuster 14.
11
31
14
 Unhook the shoulder belts 10 at the rear
of the seat shell from the yoke 13.
Ensure that the unhooked yoke 13 does
not slip behind the shell into the base (for
instance when putting the belt end 16)
10
13
 Pull the shoulder belts 10 and belt loops of
the shoulder pads 11 out of the pair of
slots 12.
 Remove the shoulder pads 11 from the
shoulder belts 10.
12
11
10
part number: 09163186 ( GM ) / 93181287 ( Vauxhall )