GB
9
Pull both sides to check that the seat is
positioned firmly.
4. Anchor TopTether
Open the spring hook 31 by pressing with
your thumb against the spring clip.
Attach the spring hook 31 to the
appropriate anchorage point (on the rear
shelf, on the floor or behind the backrest) -
see vehicle manual.
Pull on the TopTether belts 26 to remove
all slack.
26
Checklist for correct installation
For the safety of your child, check that…
• the child seat is firmly installed in the vehicle.
• the seat shell with the connectors is engaged in the ISOFIX fastening on both
sides.
• the TopTether is pulled tight over the backrest of the vehicle seat.
Removal
To release the ISOFIX fastening, squeeze the locking button 5 and the red
release button 6 together, first on one side, then on the other. The connectors
3 are disengaged.
To release the TopTether anchoring loosen the belt 26 by lifting the metal
tongue 27 of the adjuster away from the belt. Then take the spring hook 31 out
of the anchoring point.
part number: 09163186 ( GM ) / 93181287 ( Vauxhall )
To Next Page
Loading...
