Rommelsbacher EKS 2000 - Drip Pan, System Emptying, and Descaling; Cleaning Specific Parts and Drip Pan; Appliance Descaling Information

37
 Touch the bush at its shaft for
removing, turn it to the right and
unlock it.
 Then, pull the bush down.
Clean the outlet hole of the hot
water/steam nozzle thoroughly!
 Touch the stainless steel nozzle at
the shaft for attaching it and push the
nozzle on.
 Then, turn it to the left and lock it.
• Theaccessoriesarenotdishwasher-proof.
• Donotuseabrasivesordissolventsorsharpobjects!
• Neveruseasteamjetapplianceforcleaningtheapplianceandtheaccessories!
Emptying the drip pan
• The drip pan collects residual water developing during operation.
• A oater inside the drip pan shows the lling level. If the oater with red marking with indication
“VOLL” (full) is visible in the front area of the drip pan, it must be emptied urgently.
• Make sure no residual water is spilled when taking the drip pan out.
Emptying the system
• For transport or before a longer non-use period, we recommend emptying the system from residual
water.
• For this, remove the water tank and place a collecting vessel below the hot water/steam nozzle.
• Start hot water supply until there is no water any more, then stop the supply.
Descaling the appliance
• In order to ensure awless function, the appliance must be descaled regularly.
• Depending on the hardness of tap water, the appliance must be descaled after 30 – 50 litres or after
2 months at the latest. We recommend descaling together with exchanging the filter.
• Observe the following instructions for descaling!
• For descaling we recommend vinegar water at the rate of 1/3 vinegar essence and 2/3 water.
• After descaling, the system must be rinsed thoroughly.
• When using decalciers observe the manufacturer’s information.
• WARNING:Onlydescaletheappliancewhencoldandwithoutwaterlter!