To Next PageTo Next Page
Need help?Do you have a question about the Rosco DMG DASH and is the answer not in the manual?
General| CRI | >95 |
|---|---|
| Housing | Aluminum |
| IP Rating | IP20 |
| Type | LED Light |
| Color | RGB |
| LED Type | RGBW |
| Control | DMX |
| Power Supply | 100-240V AC, 50/60Hz |
Details about the DOT accessory, its item number, and use.
Specifies electromagnetic compatibility regulations.
Pertains to electrical safety standards for low voltage equipment.
Covers regulations for radio communication equipment.
General requirements for luminaires.
Specific requirements for lamp controlgear.
Details the Ingress Protection (IP) rating of the product.
Safety standards for lithium batteries in portable devices.
Regulations for transporting lithium batteries.
Certification related to the safe transport of goods.
Details specifications for the USB-C charging cable.
Outlines requirements for compatible chargers.
Provides guidance on using powerbanks for charging.
Lists charging times based on charger amperage.
Details the battery's capacity, temperature, and protection features.
Explains how the fixture charges while in use.
Controls the fixture's on/off state and blackout function.
Accesses the main menu and activates Boost Mode.
Navigates menus and locks/unlocks controls.
Adjusts intensity, scrolls through options, and makes selections.
Port for charging the fixture.
Points for attaching the fixture to mounts.
Points for attaching safety cables.
Displays and controls the light's brightness level.
Shows and adjusts the color temperature of the light.
Controls the intensity of the color.
Adjusts the color tint.
Shows the currently active operating mode.
Indicates the status of the Bluetooth connection.
Shows connection status with the myMIX app.
Displays when the fixture is charging.
Shows the remaining battery level.
Indicates connection to an external power source.
Displays options for modes and settings.
Provides status information and configuration options.
Option to toggle Bluetooth connectivity on or off.
Resets the fixture to its factory default settings.
Produces standard white light with adjustable intensity and CCT.
Allows custom color creation using Hue, Saturation, and Intensity.
Color mixing via CIE 1931 xy, accessible via the myMIX app.
Selects True Rosco Color™ gel matches or saved custom colors.
Creates various lighting effects like Emergency Vehicle or Firelight.
Matches existing filmmaking light sources by selecting from a library.
Light output and beam spread without any accessory.
Light output and beam spread with the Flat Diffuser accessory.
Light output and beam spread with the Dome accessory.
Light output and beam spread with the Eggcrate accessory.
Step-by-step guide to connecting the DMG DASH to the myMIX app.
Details using the app for selecting Rosco gel colors.
Captures colors from photos using the myMIX app.
Replicates external light sources by selecting and adjusting intensity.
Applies and customizes lighting effects via the app.
Enables control of multiple lights simultaneously by creating groups.
