EasyManuals Logo

Rosco DMG DASH User Manual

Rosco DMG DASH
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
USER MANUAL -DMG DASH™
7

POWERING AND CHARGING THE DASH
BATTERY SPECIFICATIONS
•The DMG DASH battery is a 6000 mAh Lithium-ion battery with high temperature capability. This means the battery will provide 2A of power per hour for up to three hours
when at maximum output, and that it can function up to a maximum temperature of 176ºF/80ºC.
The DMG DASH has two thermal protection sensors to protect the electronics and the battery against overheating.
The battery is also equipped with protection against short voltage.
NOTE: The DMG DASH battery can be replaced once performance is no longer acceptable. It is a custom battery designed with high temperature requirements for DMG DASH.
The battery must be replaced by a Rosco service center.
CHARGING WHILE OPERATING
• DMG DASH will recharge its battery while operating when connected to a power source via the USB-C cable. The effectiveness and speed of this capability is based on the
charge current and maximum power of the charger that the DMG DASH is plugged into.
• Because the current from the charger will be used to both produce light and charge the battery, the lower the intensity the faster the charge will be.

necessary to charge the battery at the same time.

Other manuals for Rosco DMG DASH

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rosco DMG DASH and is the answer not in the manual?

Rosco DMG DASH Specifications

General IconGeneral
BrandRosco
ModelDMG DASH
CategoryLighting Equipment
LanguageEnglish