To Next PageTo Next Page
Need help?Do you have a question about the Rosenbauer Monitor RM 24 and is the answer not in the manual?
General| Brand | Rosenbauer |
|---|---|
| Model | Monitor RM 24 |
| Category | Fire Extinguisher |
| Language | English |
Key safety warnings before operating the unit and personnel qualifications.
Instructions on finding and recording the monitor's serial number for parts.
Safety guidelines for working on the vehicle roof, including fall protection.
Steps to position the monitor and engage the pump for water operation.
How to open the discharge valve and adjust pressure for desired throw.
Important safety warnings regarding water operation, pointing the jet, and downward angle limits.
How to adjust the nozzle for full jet or spray jet and set the discharge rate.
Ensuring pump performance exceeds nozzle discharge rate to prevent cavitation.
Steps to operate the monitor in foam mode, including valve and switch settings.
How to adjust throw range and create a foam pattern using the deflector.
Critical safety warnings regarding electrical conductivity and foam concentrate hazards.
Steps to flush the monitor with clean water after operation to prevent corrosion.
How to secure the monitor in its transport position after flushing.
Emphasis on the importance of timely flushing for monitor longevity and performance.
Safety warnings related to water, foam, and their interaction with materials and environment.
Step-by-step guide to safely disconnect the monitor from its base.
Important warning about not loosening or tightening pre-adjusted lock nuts during removal.
Instructions for deploying and stabilizing the external frame for monitor operation.
Procedure for attaching the monitor and connecting the supply hose to the frame.
Critical safety points: monitor must be manned, ensure stable surface.
How to adjust the monitor control handle for horizontal and vertical operation.
Explanation of the +30° downward angle limit and the function of the safety lever.
Emphasizes continuous operator presence and slow pressure increase during operation.
Steps to connect and set up the external foam admixing unit with the monitor.
How to adjust the discharge nozzle and set the desired foam admixing rate.
Recommendation for a specific hose length between the admixing unit and monitor for optimal foam quality.
How to adjust the monitor control handle for operation with the external frame.
Explanation of the +30° downward angle limit and the function of the safety lever.
Emphasizes continuous operator presence and slow pressure increase during operation.
Setting monitor pressure to 5 bar for optimal foam quality with external admixing units.
Using the foam barrel and adjusting throw range and foam pattern.
Safety warnings regarding electrical conductivity and hazards of foam concentrate.
Procedure to flush the monitor and related systems with clean water after foam use.
Emphasizes the necessity of flushing after foam or salt water use for long-term performance.
Safety warnings related to water, foam, and their interaction with materials and environment.
Instructions for lubricating moving parts and checking them for smooth operation.
Procedure for checking the monitor for any signs of leakage.
Detailed performance data including flow rates, pressure, and operating ranges.
Information on the monitor's weight and the materials used in its construction.
A comprehensive list of all monitor parts with their corresponding numbers and names.
Diagrams illustrating the location of various components within the monitor.
Description and numbering of the parts within the HSD 2000 discharge nozzle.
Illustrations of the nozzle operating in spray jet and full jet modes.
Detailed diagrams illustrating the internal workings of the HSD 2000 discharge nozzle.
Instructions for adjusting the nozzle's discharge rate without an adjustment ring.
Steps for adjusting the nozzle, including extending the sleeve and tightening the nut.
Diagram and instructions for setting the desired distance 'A' for nozzle adjustment.
Description of the adjustment ring and its notches for setting discharge rate and admixing unit size.
Visual guide to the adjustment ring, showing discharge rates and corresponding admixing unit types.
