Ross carbonite - Page 13

16.
ME Selection Buttons — These buttons are used
to assign the control panel row to an ME,
MiniME
™
, or MultiScreen.
17.
Effects Memory Area — This area is used to store
and recall memories on the assigned ME, and to
select the various transition rates used on the
switcher.
18.
Memory Store/Recall Buttons — These buttons
are used to store or recall memories to one or more
MEs at the same time. On the C3S/C3X control
panels, there are additional buttons for selecting
specic MEs, MiniME
™
s, or MultiScreens.
Carbonite Operation Manual (v10.1) — Control Panel Overview • 13