Ross carbonite - To Set up a Matte Color

To Set Up a Matte Color
When a matte generator is assigned to a background or
key, the matte setting are displayed. Selecting the source
button again, or KEY SEL button returns to this menu.
When a matte generator is assigned to a key border or
wipe border, the matte settings is part of the setup menu,
and become active when Border is set to greater than
0.
1.
Press NEXT.
2.
Use the Load knob to select the preset color you
want to use.
3.
Press the Load knob to load the selected color.
If you want to use the preset color, ignore the
rest of this procedure.
4.
Press NEXT.
5.
Use the Hue knob to adjust the hue of your
custom color.
6.
Use the Sat knob to adjust the saturation of your
custom color.
7.
Use the Lum knob to adjust the luminance of
your custom color.
Carbonite Operation Manual (v10.1) — Patterns, Washes, and Mattes • 31