Ross carbonite - To Set the Roll VTR Attribute

•
NoRoll — GPI outputs are not triggered
•
Roll — GPI outputs are trigged (default)
To Set the Roll VTR Attribute
1.
Press RECALL > NEXT.
2.
Use the Attrib knob to select RllVTR.
3.
Use the Value knob to select whether a play
command is triggered when a source that is
assigned to a video server is recalled.
•
Memory — settings come from the memory
being recalled
•
NoRoll — play command is not triggered
•
Roll — play command is triggered (default)
Carbonite Operation Manual (v10.1) — Memory Functions • 47