34 • Destination and Sources RCP-ME User Guide (v4.0)
Figure 3.1 Toggling between two sources using slow chop
•Press CHOP twice to toggle rapidly between the two sources (toggle cadence is 400 ms). The source label on
the screen toggles between the two sources. Fast chop is indicated by an upper-case C.
Figure 3.2 Toggling between sources using fast chop
7. Do one of the following:
• If you are in slow chop, press
CHOP twice to stop toggling between the two sources.
• If you are in fast chop, press
CHOP once to stop toggling between the two sources.
The status of the button returns to
CHOP.
1234
SRC: Server 1
DST: VTR 2
C
1234
SRC: Camera 1
DST: VTR 2
C
1234
SRC: Server 1
DST: VTR 2
C
1234
SRC: Camera 1
DST: VTR 2
C
To Next Page
Loading...