RCP-ME User Guide (v4.0) Macros • 53
Each function can occur on any available level, independent of any other function within the same macro
event.
10. Repeat Steps 6 to 9 for any remaining events of the macro.
11. Send the current configuration file to the device (see “To send the current configuration to a panel” on
page 74).
Using a Macro
You can use macros on the RCP-ME.
To use a macro
1. Create a macro (see “To record a macro using the panel” on page 51 or “To configure a macro using
DashBoard” on page 52).
2. Press the macro button.
If a take button is assigned to the menu, the text on the screen that identifies the source button alternates
between Take ? and the selected source label for the last source button in the macro. The macro button flashes
with the
TAKE button.
3. If a
TAKE button is assigned to the menu, press TAKE.
To Next Page
Loading...